Crown Com-Tec 210 Professional Amplifier 4-8 Ohm or 70V Line
Crown Com-Tec 210 Professional Amplifier 4-8 Ohm or 70V Line - This is a fully tested Crown Pro Amp configured for either 70Vline or 8/4 ohm application (switch selectable). The inputs module allows for balanced (Like RCA ) or unbalanced signal connection (3Pin XLR +- and Gnd). It currently has unbalanced RCA female connector cables attached, and those are include. It was recently serviced, cleaned and fully tested by DALAUDIO and found to be in working order. We are including the Crown Datasheet. Please see all photos.
Note: This North American unit is a very quiet running unit as it has two internal heat exchangers and no fans.
Cash Sale No Holds Call or Text.
Rated Power Output
- 4 Ohm Dual Per Channel @ 1hz /150 Watts - 20hz-20KHz/ 135 Watts
- 8 Ohm Dual Per Channel @ 1hz /110 Watts - 20hz-20KHz/ 105 Watts
- 70V Dual Per Channel @ 1hz /110 Watts - 20hz-20KHz/ 105 Watts
- 8 Ohm Bridge Mono @ 1hz /300 Watts - 20hz-20KHz/ 270 Watts
- 70V Parallel Mono @ 1hz /210
- 140V Bridge Mono @ 1hz /205 - 20hz-20KHz/ 200 Watts
Features
- Power supply allows channels to be operated in 70V or 8/4 ohm mode.
- Crown’s Grounded Bridge design delivers large voltage swings without using easily stressed output-transistors.
- Patented protection circuitry compensates for overheating and overload
- Patented circuitry alerts if distortion exceeds 0.05%, providing dynamic distortion free performance.
- Full protection from shorted, open and mismatched loads; general overheating; DC; high-frequency overloads
- Safe with all types of loads.With 8/4-ohm output in Dual mode, 8 to 16-ohms in Bridge-Mono mode, and 2 to 4 ohms in Parallel-Mono mode or 70-volt output
- 19-inch standard rack - mount width, 3.5-inch height, 16-inch depth behind mounting surface and 0.25 inches in front of mounting surface.